bruce plastics logo
bruce plastics address
product naviagtion, handles, grommets, binder posts, rubber molding, plastic handles, suction cups, screw posts, plastics feet, custom molding, injection molding, rubber feet, bumpers, polytech, polylastomer, proline flooring capabilities navigation, about bruce plastics, why bruce plastics, custom molding, value added service, tesimonials, FAQ custom molding navigation, custom molding, injection molding, insert molding, over molding, troubled molding contact bruce plastics, custom molding, handles, plastic handles, bumpers, rubber feet

 



about bruce plastics navigation, about bruceplastics, why bruce plastics
custom molding navigation, custom molding, injection molding, insert molding, over molding, troubled molding
value added navigation
bruce plastics faq
contact bruce plastics
bruce plastics homepage

HANDLES
To fulfill your needs, Bruce Plastics has developed the largest and most versatile assortment of standard injection molded handles in the industry. Molded from prime virgin plastics, Bruce Plastics handles are available in your matched colors. Many Bruce Plastics handles are supplied with pre-assembled mounting hardware to save you time and labor in attaching the handles to your products.

Shown below is a sampling of our standard handles. To receive a full catalog, free samples, or prices, please call or fax us at the numbers shown above or e-mail us using the web site's convenient "Contact Us" form.

Note: All dimensions are nominal, numbers in parenthesis represent millimeters.

* Patented

Plastic Handles, Handle, handles, plastic handle

HANDLE 0544
Plastic Handles, Handle, handles, plastic handle

Attractive appearance of hand sewn handle with heavily wrapped grip and molded-in stitches. Molded from Virgin Polyethylene. Shown with hardware 2080 attached. Nominal handle size 4-15/16 x 2-9/16 (125.4 x 65.1).

HANDLE 0543
Plastic Handles, Handle, handles, plastic handle

The look of hand sewn handles is duplicated with molded-in stitches, wrapped grip, and deep leather-like graining. Molded from Virgin Polyethylene. Shown with hardware 2004 attached. Nominal handle size 5-3/32 x 2-11/64 (130.2 x 68.6).

HANDLE 0535*
Plastic Handles, Handle, handles, plastic handle

Fresh modern styling is accentuated by the matte finish, low profile and clean lines of this economical handle. Molded from Virgin Polyethylene. Shown with hardware 2056 attached. Nominal handle size 4-13/16 x 2-3/16 (119.1 x 55.6).

HANDLE 0532
Plastic Handles, Handle, handles, plastic handle

Modern styling includes deep grained finish across the top of the handle accented by smooth high gloss grip area. Molded from Virgin Polyethylene. Shown with hardware 2059 attached. Nominal handle size 5-1/8 x 2-5/16 (130.2 x 58.7).

HANDLE 0518
Plastic Handles, Handle, handles, plastic handle

Features include molded-in stitches and leather-like grained texture. For kiss print on top of stitches specify Handle 0519. Molded from Virgin Polyethylene. Shown with hardware 2085. Nominal handle size 4-3/4 x 2-7/16 (120.7 x 61.9).

HANDLE 0525
Plastic Handles, Handle, handles, plastic handle

For comfort and eye catching appeal, features include fully radiused grip area and deep leather-like grained texture. Molded from Virgin Polyethylene. Shown with hardware 2080 attached. Nominal handle size 4-13/16 x 2-5/8 (122.2 x 66.7)

HANDLE 0553
Plastic Handles, Handle, handles, plastic handle

The Olympian Handle combines ultramodern styling and strength made possible by the use of selected high impact polymers. Shown with molded hardware cap 2046. Other hardware styles available. Nominal handle size 6 x 2-47/64 (152.4 x 69.5)

HANDLE 0861*
Plastic Handles, Handle, handles, plastic handle

Wire-Core® Handle has the strength to lift anything a person can carry. The "soft feel" plastic around the wire provides a comfortable grip. Shown with Metal Base 2123* attached and Plastic Snap-In Cap 2105*, which is available with hot-stamped logo. Nominal handle size 5-3/8 x 2-11/16 (136.5 x 68.3)

HANDLE 0566*
Plastic Handles, Handle, handles, plastic handle

Economical, bar-mounting handle. Strong inbound studs allow for direct mounting to blow-molded cases. Molded from Virgin Impact Polypropylene. Shown with hardware 2153. Nominal handle size 5 x 2-1/2 (127 x 63.5)

HANDLE 0846
Plastic Handles, Handle, handles, plastic handle

Deep grained finish on handle legs is accented by textured finish in grip area and polished finish on top and sides. Molded from Virgin Impact Polypropylene. Shown with color coordinated plastic hardware bar 2106. Nominal handle size 5 x 2-1/2 (127 x 63.5).

HANDLE 0866*
Plastic Handles, Handle, handles, plastic handle

Deep leather grain appearance is combined with smooth grip area and soft contours. Molded from Virgin Impact Polypropylene. Shown with plated metal hardware bar 2058* and plastic cap 2035 .* Also available molded from Conductive Plastic for static-free cases. Nominal handle size 5-3/8 x 2-11/16 (136.5 x 68.3)

HANDLE 0886*
Plastic Handles, Handle, handles, plastic handle

Soft, matte finish is highlighted by a polished outer surface and rounded corners. Molded from Virgin Polyethylene. Shown with hardware cap 2063 and prong base 2039. Also available with rivet base 2041. Nominal handle size 5-3/8 x 2-3/4 (136.5 x 69.8).

HANDLE 0850
Plastic Handles, Handle, handles, plastic handle

Features smooth, high polished surface. Available in matching colors or with plated metallic surface. Molded from Virgin Impact Polystyrene. Generally used with #10 self-tapping screw. Nominal handle size 5-3/16 x 1-1/4 (131.8 x 31.8).

HANDLE 0106
Plastic Handles, Handle, handles, plastic handle

Low profile and compact design with large finger grip area. Available in matching colors or with plated metallic surface. Molded from Virgin Impact Polystyrene. Generally used with #6 self-tapping screw. Nominal handle size 4-1/4 x 13/64 (108 x 26.7).

HANDLE 0505
Plastic Handles, Handle, handles, plastic handle

Molded from Virgin "Soft-Feel" plastic with printed stitch detail. Available without printed stitches as handle 0507. Shown with ring 4015 and clip 2065 attached. For heavier duty model, specify 0500 with printed stitch or 0502 without stitch. Nominal handle size 5-1/2 x 9/16 (139.7 x 14.3)

HANDLE 0501
Plastic Handles, Handle, handles, plastic handle

Strong, elegant injection molded Polyethylene strap handle with deep textured finish. Measures 8" x 1" (203.2 x 25.4). Shown with plated hardware cap 2145. For prong mounting specify cap 2144.

HANDLE 5015
Plastic Handles, Handle, handles, plastic handle

HANDLE 5015 - Low cost, 3/4" (19.0) wide Polyethylene Strap Handle. Can be made to specified length and/or provided with 1/8" (3.2) or 1/4" (6.3) diameter punched holes. Shown with metal cap 2049.

HANDLE 0165
Plastic Handles, Handle, handles, plastic handle

Light duty handle, molded from Virgin Polyethylene. For heavier duty, specify Handle 0166 molded from Virgin Impact Polypropylene. Shown with hardware 2062. Nominal handle size 5 x 2-3/16 (127 x 55.6).

HANDLE 0241
Plastic Handles, Handle, handles, plastic handle

Double handle with sleek, uncluttered, modern styling. Special angled design creates extra comfortable grip area. Molded from Virgin Polyethylene. Shown with ring 4015 and clip 2042 attached. Nominal handle size 5-1/4 x 3-9/16 (133.4 x 90.5)

  home | products | custom molding | capabilities | contact us
Plastic Handles, Handle, handles, plastic handle content Area